Filter exclusively for metal magnetisable particles.
The system consists of a scraper conveyor in the bottom of which has been installed a bed of magnets, and on top of this bed a connection duct to ensure the liquid circulates around the bed of magnets.
Characteristics
Specially for processing metal magnetisable chips.
The degree of clarity obtainable is 50 microns over 90%.
Maintenance required is minimal.
Specially designed connection duct.
The connection duct is designed to allow the maximum number of particles contained in the cooling liquid to be trapped.
General specifications
MF
BASIC SPECIFICATION
Filter Rating
50µm - 90%
30µm - 90%
20µm - 90%
10µm - 90%
Filter Volume
(liters/min.)
~500
~1.000
~2.000
~3.000
~3.500
~6.000
Coolant
Water Soluble
Oils
APPLICABLE CHIP SHAPE TABLE
Material
Shape
Cutting
Polishing
Washing
Non-magnetic
Materials
50 mm
or longer
50 mm
or shorter
Needle
shape
Floating
chip
After 1st.
stage
Sludge
Grains
Magnetic
Particles
(Steel)
50 mm
or longer
50 mm
or shorter
Needle
shape
Floating
chip
After 1st.
stage
Sludge
Grains
Magnetic
Particles
(FC)
50 mm
or longer
50 mm
or shorter
Needle
shape
Floating
chip
After 1st.
stage
Sludge
Grains
- Options: Media / All Stainless Specs (Rust Protection)
We use our own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept the use. You can change the settings or get more information here.